This line of electronic hand-washing units has been devised by constantly complying with what the Department of Industrial Hygiene has established in the "guidelines for the definition of standards of safety and hygiene in operating departments".

All products of this series consist of one single tank unit in 15/10mm-thick AISI 316 stainless steel.
The unit is also equipped with an upper panelling without sharp corners and edges: such even surface avoids spreading of bacteria in any of its parts.
For the same reason the drain has been obtained directly in the base of the tank. 

The outer edge has rounded angles and is overflow-proof. The inside of the front part has an inclination of 30° to prevent water from spraying outside.

The unit can be moved forward and backward in order to allow easy access to the component parts for inspections or servicing.

The hydraulic parts are in solid brass while all parts in contact with water are perfectly smooth to prevent any spreading of bacteria.

The quantity of soap is adjustable and is delivered through a self-priming pump.
The circuits are powered by an 18 Vac transformer approved by IMQ.

The hand-washing units can also be customized up to a maximum length of 2500mm with different combinations of taps, soap dispensers and thermostatic mixers.

C618 size mm 1200x550x1100 and C619 size mm 600x550x1100 

C618 di dimensioni mm 1200x550x1100 e C619 di dimensioni mm 600x550x1100 


With 2 electronic taps (C618RT)
With 2 electronic taps and electronic soap dispenser (C618SRT)
With 2 electronic taps, electronic soap dispenser and thermostatic mixer (C618MXSRT)
With 1 electronic tap (C619RT)
With 1 electronic tap and electronic soap dispenser (C619SRT)
With 1 electronic tap, electronic soap dispenser and thermostatic mixer (C619MXSRT)

Technical specifications
Operating pressure: 1 - 10 bar
Water flow at 3 bar: 8 l/min
Finish: micro glass bead-peening

wash basins for hospital wash basins for hospital wash basins for hospital