Products > MOPPS

MO.PPS: Modular Prefabricated Perimeter Systems

MO.PPS: A flexible“Modular Prefabricated Perimeter System” composed of “Self-bearing”82mm “Thermo-acoustic Partition Sandwich Panels” with finishing of “Compact High Pressure Laminate” (C-HPL) or” Compact High Pressure Fiber Laminate” (C-HPFL) surfaces that can be easily assembled on the spot.
The system is unique to separate and divide “Fast Traffic Sanitary Areas and Changing Facilities” avoiding adequately classical masonry works.

Technical Features
-
The Sandwich Panels used are “Self-bearing” and prefabricated to the sizes demanded by each project.
- The Sandwich Panels have a finishing layer of 4mm Stratificato “Compact High Pressure Laminate”(C-HPL).
- The core of each Sandwich Panel is made from polystyrene for better “Thermo-acoustic” insulation and is “highly resistant” to moisture and mildews.
- Stiffeners consisting of “section bars” in anodized aluminium are used to secure the Sandwich Panel structures together.
- Assembly is performed through “rapid clutch hooks”.
- Floor finishing is achieved with a “cover former” in anodized aluminium or by a“bespoke elastic sealant” proposed for food or the medical industry.
- Easily combined with all systems of SPIS® family.
- Possibility for full Inspectional Hydraulic and Electric Plan installations.

Package
- Projection design covering project requirements and customer needs.
- Hydraulic Installation Plan for all MO.PPS positions (if projected) defining exact sewage and water points needed for preparation of installations. This hydraulic plan is designed by Soema and is compatible to the general hydraulic plan of the building.
- Hydraulic and waste piping material prefabricated (if projected) and attached to MO.PPS sandwich panel surfaces. This covers out ofthe wall installations and the floor surface.
- Electrical Installation Plan for all MO.PPS positions (if projected) defining exact electrical points needed for preparations of installations. This electrical plan is designed by Soema and is compatible to the general electrical plan of the building.
- Electrical material with cabling prefabricated (if projected) and attached to MO.PPS sandwich panel surfaces. This covers out of the wall installations and the floor surface.
- Full covering of all MO.PPS sandwich panel surfaces with “Compact High Pressure Laminate” (C-HPL).
- Complete Soema “sanitary electronic equipment and accessories”(if projected) defined by the category the customer chooses.
- A variety of doors.
- Element support design instructions for preparation.
- Installations Manual.
- Final Installation Certification.

MO.PPS: Modular Prefabricated Perimeter Systems MO.PPS: Modular Prefabricated Perimeter Systems